Skip to main content
Skip table of contents

DDE Problem - disturbances in communication DBM – Editors

A DDE communication occurs as follows; one application requests a communication channel to another application over the operating system (MTE -> DBM for example). The OS(!) then sends a Broadcast Message and this causes the disturbance. Using WM_COPYDATA only shifts the problem a little, as finding a window (as well as the OS!) is also dependent on a Broadcast Message.

An initial non-DAVID application has now been identified that is responsible for DDE communication problems:

"hpqtra08.exe"

The file is in fact delivered with the installation of a current hp printer.

-- HPQTRA08.exe is the HP Digital Imaging Monitor.
-- It's responsible for inbound communication from the printer to your computer
-- when the printer is connected through the network,
-- so you need this for scanning and checking ink levels.

also see the following article:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1213965033713+28353475&threadId=1106272

The file is found in 'autostart' and should be removed. Subsequently restarting the machine should result in Digas applications running stable and expediently again.

--------------------------------

DEUTSCH

DDE Probleme - Hängende Kommunikation zwischen Editoren und DBM

Eine DDE-Kommunikation läuft so ab, dass die Applikation beim Betriebssystem einen Kommunikationsanfrage zu einer anderen Applikation (z.B. MTE -> DBM) anmeldet. Daraufhin verschickt das

OS(!) eine Broadcast-Message und diese verursacht das Hängenbleiben. Bei WM_COPYDATA ist das Problem nur ein wenig verschoben, da auch das Finden eines Fensters (ebenfalls OS!) mit einer Broadcast-Message verbunden ist.

Es konnte nun eine erste Nicht-DAVID Applikation identifiziert werden, welche für die DDE Kommunikationsprobleme verantwortlich ist:

"hpqtra08.exe"

Die datei wird wohl bei der installation eines modernen hp-druckers mitgeliefert.

-- HPQTRA08.exe is the HP Digital Imaging Monitor.
-- It's responsible for inbound communication from the printer to your computer
-- when the printer is connected through the network,
-- so you need this for scanning and checking ink levels.

siehe auch folgenden artikel:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1213965033713+28353475&threadId=1106272


die datei steht im autostart und muss entfernt werden, danach maschine neu starten, dann läuft die digas-anwendung wieder stabil und schnell.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.